Cutmaster Electronic

Hombach Forsttechnik

€900.00*

Prices excl. VAT plus shipping costs

Available in 3 Tagen

Motor size

5KW

7,5kW

11kW

ohne Motor

Swivel direction

to the left

to the right

Swivel system

Hydraulical (hydraulic cylinder)

Manually-operated (a hand lever can be mounted)

Product number: SW10011.14

Product information "Cutmaster Electronic"

Electrically driven chainsaw

The Cutmaster Electronic has been specially developed for use in cut-to-length devices and automatic splitting machines.

The saw is available with powerful electric motors from German manufacturers in various sizes, which drive the chain at a cutting speed of 20 m / s.

The chain is tensioned by a set screw and lubricated by the integrated lubrication system.

The Cutmaster Elektro is equipped with a hydraulic swivel system.

- Integrated chain lubrication
- 20 m/sec cutting speed
- chain pitch 0.404".
- AC motors made by German manufacturers
- Chainwheel with 16 dents
- By means of frequency converters you can increase the speed
- Hydraulic swivel device
- Swivel axis in the motor shaft
- Robust design

Zubehörartikel

Saw-bar

Saw-bar The saw swords are suitable for all our saws. With the Harvester pitch of 404, the necessary stability is achieved. The specified length is the total length, some 10 cm of which are needed for clamping in the saw. This means that e.g. the available lengh of a sword measuring 75 cm is approx. 65 cm.

€77.23*

Details

Chain wheel sprockets

Chain wheel sprockets Available in various pitches Pitch 12, 13, 14, 15, 16 Pitfch 14 is the standard in our Cumaster Basic. Pitfch 14 is the standard in our Cumaster Speed. Pitfch 14 is the standard in our Cumaster Electro. The chain sprockets all have a pitch of 404 and a 25 mm borehole with featherkey notches.

From €48.18*

Details

Micro throttle valve

Micro throttle valve The micro throttle valve is perfectly suitable wherever precise control is required for small volume flows.The integrated non-return valve throttles the volume flow from 'A' to 'B', while there is free flow from 'B' to 'A'. Connections: G1/8" The throttle is used to adjust the swing speed of the saw.

€44.54*

Lubrication oil tank (direct assembly)

Lubrication oil tank for direct assembly The lubricating oil tank can be mounted directly on the Cutmaster Basic, Speed or Electric.The tank holds approx. 1 l of lubricating oil.

€85.00*

Pressure reducing valve

Pressure reducing valve Functionality Once the pressure in 'U' is reached, the valve blocks the passage between 'E' and 'U' to keep the pressure 'U' constant.If the pressure in 'U' is exceeded, it can be relieved via 'Dr'. This does not influence the upstream pressure in 'E'. Since it is a single-acting valve, it allows a free oil return from 'U' to 'E' Adjustment range from 5 to 50 bar. Connections: G3/8" The pressure reducing valve is used to adjust the pressure on the swing cylinder.

€183.87*